Chapter 2 Hardware Installation
Chapter 5
www.dfi.com
Chapter 5 Ports and Connectors
DC-in
1
6
1
1
1
3
1
1
Mini
PCIe
1
12
12
1
Reset Power
Front
Panel
(JP11)
DDR4
DDR4
DDR4
DDR4
COM 4
LAN 2
LAN 1
USB 2
USB 1
USB 3.0
USB 4
USB 3
COM 3
COM 2
COM 1
VGA
USB 3.0
SATA 3.0
SPI Flash
BIOS
JP2
JP1
Battery
JP7
Mini
PCIe
MIC-in
LINE-out
DP or HDMI
SATA 2 SATA Power
Realtek ALC888
Intel
WGI210AT
JP3
JP4
COM4/DIO Pin Select
COM4/DIO Pin Select
Clear CMOS
Mini PCIe PCIe/
SATA Select
(JP3)
(JP4)
Auto PWR ON
(JP1)
(JP2)
(JP7)
1
USB Ports
The system board is equipped with four onboard USB 3.0 ports (USB 1-4). USB devices allow
data exchange between your computer and a wide range of simultaneously accessible external
Plug and Play peripherals.
BIOS Setting
Configure the onboard USB in the Advanced menu (“USB Configuration” submenu) of the
BIOS. Refer to Chapter 7 for more information.
Driver Installation
You may need to install the proper drivers in your operating system to use USB devices. Refer
to Chapter 8 for more information.
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse
to wake up a system from the S3 (STR - Suspend To RAM) state.
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the
+5V_standby power source of your power supply must support ≥1.5A. For 3 or more
USB ports, the +5V_standby power source of your power supply must support ≥2A.
USB 1
USB 2
USB 3
USB 4
USB 3.0