DFI E586-ICP, Руководство пользователя, Страница: 52 / 96

EISA/PCI System Board
b. Select the board you want to add and press <Enter>.
If you wish to add an ISA board, choose Add ISA
option by pressing <Insert> at the “Select the Board
to Add” screen. An ISA Board Database box similar
to the one shown on the screen below will appear.
Note:
You must define an ISA board before it will appear
in the ISA Database definition box. See the “Define
ISA Board” section for further information.
If you do not want to add a board, choose Cancel to
go back to the Add and Remove Boards.
Highlight the board you want to add in the configuration
and press <Enter>. A Slot Selection box similar to one
shown on the next page will appear.
System - DFI EB3486-TN EISA SYSTEM BOARD
Slot
1 - Empty
Slot 2 - Empty
Slot 3 - Empty
Slot 4 - Empty
Slot 5 - Empty
Slot 6 - Empty
Slot 7 - Empty
Slot 8 - Empty
- Press INSERT to add a board that was not deleted or has not been installed yet.
- Press DEL to remove the selected board.
- Press F7 to move the selected board to a different slot.
- Press Esc when finished with this step.
[Add=INSERT] [Remove=DEL] [Move=F7] [Done=ESC] [HELP=F1]
Select the ISA board to load or press <Esc> to exit.
ISA Board Database
Step 2 - Add and Remove Boards
[Ok=ENTER] [Cancel=ESC]
a
[ ] WG-1200VL
4-6
u
EISA Configuration Utility