DFI E586-ICP, Руководство пользователя

Страница: 48 / 96

EISA/PCI System Board
CMS File
The CMS file contains a copy of the configuration
information that is written into the system’s Extended
CMOS Memory. Each CMS file should have a
corresponding INF file.
INF File
The INF file contains detailed information about a
configuration such as switch and jumper settings,
software statements, connection statements, and resource
allocation. The INF file is used by the “Display/Print”
command to recall information on a saved configuration.
Each INF file should have a corresponding CMS file.
Initial Configuration
Every EISA system board and expansion board comes
with a CFG file. Prior to running the ECU, make sure
that all CFG files for expansion boards you are using are
in the same directory as the ECU file. If you did not
receive the CFG file for your expansion board, please
contact your dealer or the board manufacturer.
If you are installing an EISA hard drive controller/SCSI
host adapter, you will need to run the ECU from a
bootable floppy diskette because the system will not see
the hard drive until the EISA expansion board is
configured. To run the ECU after the hard drive
controller/SCSI host adapter is installed:
1. Create a directory on the disk drive where you want
to install the EISA configuration files. Change to this
directory.
4-2
u
EISA Configuration Utility