22
Step1.
Power-‘on’ and let the initial screen for starting tests displayed through the
process of the calibration.
Step2.
Dip a strip into fresh urine sample and take it out immediately. Remove
excessive urine by touching the edge of strip on a soft absorbent tissue.
Place the strip on the plate loader. Touch the
Test Start
.
Step 3.
After completing the test and analyzing the result, the result is displayed.
In case the external printer is connected through the USB cable, the result
will automatically be printed.
To return to the test menu, press<Test> in the bottom of the screen. You
can now start measurement of the next sample.
These results are automatically stored and can be looked up and viewed
afterwards. Additionally, the data can also be transmitted to a computer.
