22
Chapter 5 Ports and Connectors
Chapter 5
www.d
fi
.com
Chapter 5 - Ports and Connectors
Rear Panel I/O Ports
The rear panel I/O ports consist of the following:
• 1 PS/2 keyboard/mouse port
• 2 COM ports
• 1 DVI-I port
• 1 HDMI port
• 2 RJ45 LAN ports
• 4 USB 2.0 ports
• 2 USB 3.0 ports
• Line-out
jack
• Line-in
jack
• Mic-in
jack
PS/2 Keyboard/Mouse Port
PS/2 Keyboard/Mouse
This rear I/O port is used to connect a PS/2 keyboard/mouse.
Wake-On-PS/2 Keyboard/Mouse
The Wake-On-PS/2 Keyboard/Mouse function allows you to use the PS/2 keyboard or PS/2
mouse to power-on the system. To use this function:
• Jumper
Setting
JP1 must be set to “2-3 On: +5V_standby”. Refer to “PS/2 KB/MS Power Select” in this chapter
for more information
.
• BIOS
Setting
Configure the wake-up function of PS/2 keyboard/mouse in the Advanced menu (“ACPI Power
Management Configuration” submenu) of the BIOS. Refer to the chapter 7 for more informa-
tion.
Important:
The +5V_standby power source of your power supply must support
≥
720mA.
Line-out
Mic-in
Line-in
HDMI
COM 1
USB 2.0
COM 2
DVI-I
PS/2 KB/MS
USB 2.0
USB 3.0
LAN 2
LAN 1