30
User's Manual |
CS632
Chapter 2
HARDWARE INSTALLATION
LAN LED
X
Internal I/O Connectors
The LAN LED connector is used to detect the connection state of RJ45 LAN ports when the
connection is made to an active network via a cable. The pin functions of the LAN LED connec-
tor are listed below.
LAN LED Pin Assignment
Pin Assignment
Pin Assignment
1
GBE(LAN1)_1000
2
GBE(LAN1)_100
3
GBE(LAN1)_LED_LINK_ACT
4
3V3DU
5
LINK(LAN2)_1000
6
LINK(LAN2)_100
7
LINK(LAN2)_ACTIVITY
8
3V3DU
LAN LED Connector
1
7
2
8
Expansion Slots
M.2 Sockets
The M.2 socket is the Next Generation Form Factor (NGFF) which is designed to support mul-
tiple modules and make the M.2 more suitable in application for solid-state storage. The board
preserves space for the M.2 M key socket (22mm x 42mm, and 22mm x 80mm).
Mini PCIe
The Mini PCIe socket allows for a full-size Mini PCIe module. The Mini PCIe 1 supports PCIe,
SATA, and USB signals.
BIOS Setting
Configure PCIe root ports in the Advanced menu (“PCI Express Configuration” submenu) of the
BIOS. Refer to chapter 3 for more information.
Jumper Setting
Select the signal of Mini PCIe via jumper settings as previously instructed in this chapter.
Mini PCIe
M.2 M Key
X
Internal I/O Connectors
Note:
1. SATA4 and Mini PCIe share one mutual bus and do not co-exist.
2. When SATA0 exists, the M.2 will not support mSATA.
