background image

www.d

fi

 .com

22

Chapter 2 Hardware Installation

Chapter 2

COM (Serial) Ports

COM 1 and COM 2 are fixed at RS232. Please refer pin functions of COM 1 above.

The pin functions of COM 2 will vary according to JP6’s setting. JP6 allows you to configure 

COM 2 to RS232 or RS232 with power. Refer to “COM 2 RS232/Power Select” in this chapter 

for more information.

The serial ports are asynchronous communication ports with 16C550A-compatible UARTs that 

can be used with modems, serial printers, remote display terminals, and other serial devices.

Connecting External Serial Ports

Your COM port may come mounted on a card-edge bracket. Install the card-edge bracket to 

an available slot at the rear of the system chassis then insert the serial port cable to the COM 

connector. Make sure the colored stripe on the ribbon cable is aligned with pin 1 of the COM 

connector. 

BIOS Setting

Configure the COM ports 1/2 in the Advanced menu (“NCT6106D Super IO Configuration” 

submenu) of the BIOS. Refer to the chapter 3 for more information.

RT

S-

RI

-

DSR

-

CTS-

6 7 8 9

DCD-

SO-

SIN-

DT

R-

GND

1 2 3 4 5

COM 1: RS232

COM 2: RS232

1
2

9

10

Audio 

Rear Audio

The system board is equipped with 2 audio jacks (Line-out and Mic-in). Line-in jack is available 

upon request. A jack is a one-hole connecting interface for inserting a plug.

•  Line-in Jack (Light Blue) (optional)

 

This jack is used to connect any audio devices such as Hi-fi set, CD player, tape player, 

AM/FM radio tuner, synthesizer, etc.

•  Line-out Jack (Lime)

 

This jack is used to connect a headphone or external speakers.

•  Mic-in Jack (Pink)

 

This jack is used to connect an external microphone.

Front Audio

The front audio connector allows you to connect to the second line-out and mic-in jacks that 

are at the front panel of your system. 

BIOS Setting

Configure the audio settings in the Chipset menu (“PCH-IO Configuration” submenu) of the 

BIOS. Refer to the chapter 3 for more information.

Driver Installation

Install the audio driver. Refer to the chapter 4 for more information.

Rear Audio

Line-out

Mic-in

Line-in (optional)

Front Audio

1

Mic2-L

Line2-R

GND

GND NC

2

9

Mic2-

JD

Line2-

JD

10

Mic2-R

Line2-L

Содержание CS100-C246










































































Отзывы: