DFI AM75-EC, Руководство пользователя

Страница: 63 / 99

63
!
Award BIOS Setup Utility
then let the controller and the CPU perform the complete task by
themselves. Your system supports five modes, 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select
the best available mode after checking your drive.
Auto The BIOS will automatically set the system according to
your hard disk drive’s timing.
Mode 0-4 You can select a mode that matches your hard disk
drive’s timing. Caution: Do not use the wrong setting
or you will have drive errors.
IDE Primary Master/Slave UDMA and IDE Secondary Master/
Slave UDMA
These fields allow you to set the Ultra DMA in use. When Auto is
selected, the BIOS will select the best available option after checking
your hard drive or CD-ROM.
Auto The BIOS will automatically detect the settings for you.
Disabled The BIOS will not detect these categories.
Init Display First
This field is used to select whether to initialize AGP or PCI first
when the system boots.
AGP When the system boots, it will first initialize AGP.
PCI Slot When the system boots, it will first initialize PCI.
IDE HDD Block Mode
Enabled The IDE HDD uses the block mode. The system BIOS
will check the hard disk drive for the maximum block
size the system can transfer. The block size will depend
on the type of hard disk drive.
Disabled The IDE HDD uses the standard mode.
Onboard FDD Controller
Enabled Enables the onboard floppy disk controller.
Disabled Disables the onboard floppy disk controller.