DFI AM36-EC Скачать руководство пользователя

Страница: 83 / 95

Supported Softwares

VIA

Service Pack Installation Notes

AGP VxD Driver and VIA INF Driver in the VIA Service Pack

are supported in Windows

95, Windows

98, Windows

98 SE,

Windows

ME and Windows

2000.

You must first install VIA

Service Pack prior to installing any other

drivers. However, this may not be the case for some AGP cards.

Please read carefully the following information.

Important:

The VGA driver that came with some AGP cards is already

bundled with the AGP VxD driver. Since the version of the

bundled VxD driver may be older than the one provided in the

CD, installing the bundled VxD driver may cause problems. If

you are using this type of card, we recommend that you install

first the AGP cards VGA driver before installing the VIA Service

Pack.

To install the VIA Service pack, please follow the steps below.
1. Insert the CD that came with the system board package into a

CD-ROM drive. The autorun screen (Main Board Utility CD) will

appear.

2. Click VIA Service Pack.
3. The Welcome screen will appear. Click Next. Please read the

VIA Service Pack readme carefully before proceeding to step 4.

4. Follow the prompts on the screen to complete the installation.
5. Reboot the system for the drivers to take effect.

4.4 Audio Drivers and Software Application

The CD in the system board package also includes audio drivers

and audio playback software for Windows



95, Windows



98,

Windows



98 SE, Windows



ME, Windows NT



4.0 and Windows



2000 operating systems. For installation instructions or information

about their corresponding readme, click the Read Me button in

the autorun screen. The autorun screen normally appears after the

CD is inserted into a CD-ROM drive.

Содержание AM36-EC
































































































Результаты поиска

Содержание AM36-EC

Отзывы:

Похожие инструкции для AM36-EC

Бренды по названию

Популярные бренды

DFI AM36-EC, Руководство пользователя

Результаты поиска

Содержание AM36-EC

Отзывы:

Похожие инструкции для AM36-EC

Бренды по названию

Популярные бренды