DFI AL171, Руководство пользователя

Страница: 39 / 50

www.dfi .com
39
Chapter 3 BIOS Setup
Chapter 3
Smart Fan Function
This section configures the Smart Fan Function.
Enable/Disable Smart Fan
Smart Fan Function
SYS Smart Fan1 Control
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
SYS Smart Fan2 Control
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
Advanced
F1 Help ↑ / ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ← / →  Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility Rev. 5.0
<Enable>
[30]
[40]
[50]
[60]
[35]
[60]
[80]
[100]
<Enable>
[30]
[40]
[50]
[60]
[35]
[60]
[80]
[100]
SYS Smart Fan1/Fan2 Control
Enable or disable the system smart fan. If disabled, Fix Fan Speed Count field ranges
from 1 to 100% (full speed) will appear.
Boundary 1 to Boundary 4
Set the boundary temperatures that determine the operation of the fan with different
fan speeds accordingly. For example, when the system or the CPU temperature reaches
boundary 1 temperature, the system or CPU fan should be turned on and operate at
the designated speed. The range is from 0-127
o
C.
Fan Speed Count 1 to Fan Speed Count 4
Set the fan speed. The range is from 1 to 100% (full speed). The fans will operate
according to the specified boundary temperatures above.
TPM Availability
Show or hide the TPM availability and its configurations.
TPM Operation
Select one of the supported operation to change TPM2 state.
Clear TPM
Remove all TPM context associated with a specific Owner.
Set Supervisor Password
Set the supervisor’s password and the length of the password must be greater than
one character.
Select one of the supported
operation to change TPM2
state.
Current TPM Device
TPM State
TPM Availability
TPM Operation
Clear TPM
Supervisor Password
Set Supervisor Password
Main Advanced
F1 Help ↑ / ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ← / →  Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility
Security Boot Exit
Rev. 5.0
Security
This section configures the security settings for entering the BIOS setup utility.
<TPM 2.0 (FTPM)>
All Hierarchies Enabled, Owned
<Available>
<No Operation>
[ ]
Not installed
No Operation
Enable
Disable
TPM Operation