16
Quick Setup Guide
1
Quick Setup
Guide
1.3.13 AGP 4x LED / DIMM/PCI Standby Power LED
On: Default
3.3VSB Standby Power to PCI slots
(PCI 2.2 spec.)
Off:
Non-PCI 2.2 spec.
The
AGP 4x LED
will light only when the AGP slot is installed with a 4x
add-in card.
The
DIMM Standby Power LED
will turn red when the systems power is
on or when it is in the Suspend state (Power On Suspend or Suspend to
RAM). It will not light when the system is in the Soft-Off state.
The
PCI Standby Power LED
will turn red when the system is in the
power-on, Soft-Off or Suspend (Power On Suspend or Suspend to RAM)
state.
Lighted LEDs serve as a reminder that you must power-off the system
then turn off the power supplys switch or unplug the power cord prior to
installing any DIM modules or add-in cards.
1
2
1
2
3.3VSB Standby for PCI - Jumper JP1
