9
1
Quick Setup Guide
Quick Setup
Guide
Warning:
• To ensure proper boot up and operation of your system, you
must power-off the system then turn off the power supply’s
switch or unplug the AC power cord prior to altering the setting
of a jumper or replacing the CPU.
• Electrostatic discharge (ESD) can damage your system board,
processor, disk drives, add-in boards, and other components.
Perform the upgrade instruction procedures described at an ESD
workstation only. If such a station is not available, you can provide
some ESD protection by wearing an antistatic wrist strap and
attaching it to a metal part of the system chassis. If a wrist
strap is unavailable, establish and maintain contact with the
system chassis throughout any procedures requiring ESD
protection.
.
.
.
.
.
.
.
.
1.2 System Memory
The system’s memory speed differs according to the type and
number of DIMM used. Please refer to the table below:
Module 1pc Runs at 2pcs Run at 3pcs Run at 4pcs Run at
DDR 400 400MHz 400MHz 333MHz 266MHz
DDR 333 333MHz 333MHz 333MHz 266MHz
DDR 266 266MHz 266MHz 266MHz 266MHz
