44
English
2
English
2.4 Supported Softwares
The CD that came with the system board contains drivers, utilities
and software applications required to enhance the performance of
the system board.
Insert the CD into a CD-ROM drive. The autorun screen (Main
Board Utility CD) will appear. If after inserting the CD, "Autorun" did
not automatically start (which is, the Main Board Utility CD screen
did not appear), please go directly to the root directory of the CD
and double-click "Setup".
2.4.1 VIA
®
Service Pack
The VIA
®
Service Pack contains the following drivers.
• VIA ATAPI Vendor Support Driver
• AGP VxD Driver
• IRQ Routing Miniport Driver
• VIA INF Driver
To install VIA Service Pack, please follow the steps below.
1. Click “VIA Service Pack”. The “Welcome” screen will appear.
2. Click “Next”. Please read the “VIA Ser vice Pack Readme”
carefully before proceeding to step 3.
3. Follow the prompts on the screen to complete the installation.
4. Reboot the system for the drivers to take effect.
VIA
®
Service Pack Installation Notes
The “AGP VxD Driver” and “VIA INF Driver” drivers in the “VIA
Ser vice Pack” are suppor ted in Windows
®
95, Windows
®
98,
Windows
®
98 SE, Windows
®
ME and Windows
®
2000.
You must first install VIA
®
Service Pack prior to installing any other
drivers. However, this may not be the case for some AGP cards.
Please read carefully the following information.
