84
3
BIOS Setup
3.1.7.4 Shutdown Temperature
You can prevent the system from overheating by selecting a tem-
perature in this field. If the system detected that its temperature
exceeded the one set in this field, it will automatically shutdown. This
function will work only when you enable this function in the
Hardware Monitor utility.
Note:
The onboard hardware monitor function is capable of detecting
“system health” conditions but if you want a warning message
to pop-up or a warning alarm to sound when an abnormal
condition occurs, you must install the Hardware Monitor utility.
This utility is included in the CD that came with the system
board. Refer to the Hardware Monitor section in chapter 4 for
more information.
