75
3
BIOS Setup
selected the midi port’s address, you may select its IRQ in the
“Midi Port IRQ” field.
Midi Port IRQ
This field is used to select the midi port’s IRQ.
3.1.4.4 IDE HDD Block Mode
Enabled
The IDE HDD uses the block mode. The system
BIOS will check the hard disk drive for the maximum
block size the system can transfer. The block size will
depend on the type of hard disk drive.
Disabled
The IDE HDD uses the standard mode.
3.1.4.5 Init Display First
This field is used to select whether to initialize the AGP or PCI
first when the system boots.
AGP
When the system boots, it will first initialize the
AGP.
PCI Slot
When the system boots, it will first initialize PCI.
3.1.4.6 IDECH0 Access Interface and IDECH1 Access Interface
These fields are used to select the access interface of the IDE
devices. The options are EBD Bus and PCI Bus.
3.1.4.7
USB0 Access Interface, USB1 Access Interface and USB2 Ac-
cess Interface
These fields are used to select the access interface of the USB
devices. The options are EBD Bus and PCI Bus.
3.1.4.8 USB2.0 Access Interface
This field is used to select the access interface of the USB 2.0
device. The options are EBD Bus and PCI Bus.
3.1.4.9 MAC Access Interface and Audio Access Interface
These fields are used to select the access interface of the MAC
and audio device. The options are EBD Bus and PCI Bus.