DFI 586OP, Руководство пользователя

Страница: 61 / 88

586OP
Installing the Windows 3.1x and Windows for
Workgroups Driver
To install:
1. You must first install the DOS driver. (Run
INSTALL.EXE, under the DOSDRV directory, to
install the DOS driver).
2. Use Windows’ File Manager to run
A:\WINDRV\INSTALL.EXE.
To remove:
1. When you install the Windows driver, the original
SYSTEM.INI under the Windows directory will be
renamed as SYSTEM.001.
To remove the Windows driver, rename
SYSTEM.001 to SYSTEM.INI.
The Windows 32-bit driver supports:
1. Two channels with two drives for each channel. This
totals to a maximum of four drives.
2. Track Remapping to support hard disk larger than
528MB.
3. Microsoft’s 32-bit driver does not support a second-
ary channel and track remapping. It also doe not
enable the 32-bit disk access during installation if
the target disk is connected to the secondary chan-
nel. The 32-bit disk access will be enabled after the
Windows driver is installed.
IDE Device Drivers
u
4-6