1
Introduction
11
Serial ATA is a storage interface that is compliant
with SATA 1.0 specification. With speed of up to
3Gbps, it improves hard drive performance faster than the standard
parallel ATA whose data transfer rate is 100MB/s. LT600-DR allows
configuring RAID on Serial ATA drives. It supports RAID 0, RAID 1,
RAID 0+1 and RAID 5.
The two Realtek PCI Express Gigabit LAN con-
trollers support up to 1Gbps data transmission.
The system board is equipped with an IrDA connec-
tor for wireless connectivity between your computer
and peripheral devices. The IRDA (Infrared Data Association) specifi-
cation supports data transfers of 115K baud at a distance of 1
meter.
The system board supports USB 2.0 and USB 1.1
ports. USB 1.1 supports 12Mb/second bandwidth
while USB 2.0 suppor ts 480Mb/second bandwidth providing a
marked improvement in device transfer speeds between your com-
puter and a wide range of simultaneously accessible external Plug
and Play peripherals.
PCI Express is a high bandwidth I/O infra-
structure that possesses the ability to scale
speeds by forming multiple lanes. The system board currently sup-
ports the physical layer of x16 lane widths. The x16 PCI Express
lane supports transfer rate of 4 Gigabytes per second.
This feature allows the system that is in the
Suspend mode or Soft Power Off mode to
wake-up/power-on to respond to calls coming from an external mo-
dem or respond to calls from a modem PCI card that uses the PCI
PME (Power Management Event) signal to remotely wake up the
PC.
Important:
The 5V_standby power source of your power supply must sup-
port
≥
720mA.
USB
SERIAL ATA
irda
gigabit lan
pci express
wake-on-ring
