19
EN
- Children and pregnant women must not enter the work area.
- Do not eat, drink or smoke in the work area.
- Pre 1960 buildings may have paint containing lead on wood or metal surfaces. If you
suspect that the workpiece contains lead, seek professional advice.
• Some wood and wood type products, especially MDF (Medium Density Fibreboard), can produce
dust that can be hazardous to your health. We recommend the use of a dust mask with
replaceable filters when using this product in addition to using the dust extraction facility.
V
ibration and noise reduction
To reduce
the
impact of noise and vibration
emission, limit
the
operating time,
use
low-vibration
and low-noise
operating
modes,
and wear personal protective
equipment.
Take the following points into account to minimize the vibration and noise exposure risks:
• Only use the product as intended by its design and these instructions.
• Ensure that the product is in good condition and well maintained.
• Use correct attachments for the product and ensure they are in good condition.
• Keep a tight grip on the handles/grip surface.
• Maintain this product in accordance with these instructions and keep it well lubricated (where
appropriate).
• Plan your work schedule to spread any high vibration tool use across a longer period of time.
Emergency
Use this instruction manual to familiarise yourself with the use of this product.
Memorise the safety directions and follow them to the letter. This will help to prevent
risks and hazards.
• Always be alert when using this product, so that you can recognise and handle risks early.
Fast intervention can prevent serious injury and damage to property.
• Switch off and disconnect from the power supply if there are malfunctions. Have the product
checked by a qualified professional and repaired,if necessary,before you operate it again.
Residual risks
Even if you are operating this product in accordance with all of the safety requirements,
there are still potential risks of injury and damage. The following dangers can arise in
connection with the structure and design of this product:
• Health defects resulting from vibration emission if the product is being used over long periods
of time or not adequately managed and properly maintained.
• Injuries and damage to property due to broken attachments or the sudden impact against hidden
objects during use.
• Danger of injury and property damage caused by flying objects.
2. SAFETY INSTRUCTIONS
Содержание S1T-YH-13B
Страница 30: ...29 EN ...
