Dexter Power JL811201, Юридические и техника безопасности инструкции

Страница: 66 / 76

Circuit Requirements
Only connect your machine to a circuit that meets the requirements below.
Always check to see if the wires and circuit breaker in your circuit are capable of
handling the amperage draw from your machine, as well as any other machines
that could be operating on the same circuit. If you are unsure, consult a qualified
electrician.
Power supply
• The compressor is equipped with a mains cable with shock proof plug.This can
be connected to any 230V~50Hz shock proof socket which is protected by a 16A
fuse.
• Long supply cables, extensions, cable reels etc cause a drop in voltage and can
impede motor start-up. Do not use cables longer than 10m. advises to use a
longer air hose instead.
• Do not use the air compressor at temperatures below 0°C
Never forget that the earthing core is the green or the yellow/
green wire. Never connect this green wire to a terminal under
load. Before replacing the plug of the feed, make sure that the
earth cable is connected. If in doubt, please call in a qualified
electrician and have the earthing checked.
2. SAFETY INSTRUCTIONS
7
EN