SAC 2090 MOUNTING DIMENSIONS(Unit:mm)
SAC 2090 Mounting Dimensions
Mount the amplifier so that it is not damaged by the feet of backseat passengers or shifting cargo in the trunk. Mount the amplifier so that it remains dry never mount an
amplifier outside the car or in the engine compartment. Using the amplifier as a template, mark the location of the mounting holes on the mounting surface, drill pilot holes,
and attach the amplifier to the mounting surface with screws. Make sure the amplifier is mounted securely.
CHOOSING A LOCATION AND MOUNTING THE AMPLIFIER
Amplifiers need air to stay cool. Suitable locations are under a seat. ( provided the amplifier doesn't interfere with the seat adjustment mechanism), in the trunk, or in any
other location which provides enough air for the amp to cool itself. For the heat sink of the SAC on the both side, Note convection cooling of the both heat sink, and keep
the bottom or top of the amplifier no-touching any fabric or vinyl material.
At the installation sites, locate and make a note of all fuel lines, hydraulic brake lines, vacuum lines, and electrical wiring. Use extreme caution when cutting or drilling
in and around these areas.
Before drilling of cutting holes, use a utility knife to remove unwanted fabric or vinyl to keep material from snagging in a drill bit.
When routing cables, keep input-signal cables away from power cables and speaker wires.
When making connections, make certain they are secure and properly insulated. If the amplifier's fuse must be replaced, use only the same type and rating as that
of the original. Do not substitute another kind.
82.5
380
170
227
GB 3
GB 3
GB
