INSTALLATION WARNINGS AND TIPS
INSTALLATION
WARNING
Playing loud music in an automobile can hinder your ability to hear traffic and permanently damage your hearing. We recommend listening at low or
moderate levels while driving your car. DEXON CZECH s.r.o. accepts no liability for hearing loss, bodily injury or property damage resulting from the use
or misuse of this product.
To get the best performance from your DEXON Series amplifiers, we strongly recommend that installation be entrusted to a qualified
professional. Although these instructions explain how to install DEXON Series amplifiers in a general sense, they do not show specific
installation methods that may be required for your particular vehicle. If you do not have the necessary tools or experience, do not attempt the
installation yourself. Instead, please ask your authorized DEXON car audio dealer about professional installation.
IMPORTANT
SAC 2090 Specifications
Always wear protective eyewear when using tools.
Turn of f all audio systems and other electrical devices before you start. Disconnect the (-) negative lead from your vehicle's battery.
Check clearances on both sides of a planned mounting surface before drilling any holes or installing any screws. Remember that the screws can extend behind the
surface.
GB 2
GB 2
• 2 channel amplifier with bridge regime
• power 2 × 90 W rms / 120 max. / 4
, 13,8 V
• power 1 × 225 W rms / 450 W max. / 4
, 13,8 V, bridge
• minimal load impedance 2
in stereo regime
• THD 0,073 / max. power
• ratio S/N 97 dB / max. power, 77 dB / 1 W
• input sensitivity 413 mV / max. power
• frequency response 10 - 52 000 Hz / - 3dB
• bass boost 6 dB / 45 Hz
W
W
W
• low pass crossover 66 - 275 Hz
• high pass crossover 40 - 178 Hz
• 2 input connectors Cinch with paralel outs
• high compliance connect terminals
• analogue voltmeter with background blue light
• power and protect indication
• power and overheat protect circuits
• mounting hardware and spare fuses included
• dimensions 225 × 90 × 380 mm
GB
