Dexon OWMDH Series, Руководство пользователя

Страница: 7 / 25

Dexon Canada Air Systems Inc OWMDH Series Use Manual Version 07.2019
Page 6
3.4 STATUS INDICATION
Alarm
Module
Status
Board
Status Board with Optional Alarm Module
Status Board - 95STS
The blower heater is equipped with a status board to provide the following status indications:

Power On
– indicates there is power to the unit.

Fan Stopped
– indicates a fan failure or “Low Temp.” shut down.

Low Temp.
– indicates the unit has gone into a “Low Temp.” shut down condition.

Overheat
– indicates the unit has gone into an “Overheat” condition.

Element 1
– indicates there is a heat demand and the LED can be either blinking or
constant.

Element 2 & 3
– indicate stage 2 or 3 are required to maintain the desired temperature.
These LEDs will not blink they will remain constant.
WARNING:
The remote manual mode interface feature is intended to temporarily turn on “Manual”
mode (full fan speed) for added s
afety regardless of the position of the “Auto/Manual” toggle switch
on the status board. If the unit was previously in “Auto” mode it will return to “Auto” mode when the
remote dry contact opens. If it was in “Manual” mode the blower heater will remain in “Manual” and
should be switched back to “Auto”. The unit should never be left in “Manual” mode since the heating
capacity of the unit is based on preset airflow rate and continuous duty in “AUTO” mode.