DIMAX404 User’s Manual
DEXON Systems
11
1920x1080@60Hz and checks all the inputs again. When this test sequence is finished, the unit
automatically starts a new test loop.
Factory Reset
The factory reset is a full restore of device to its factory settings.
3.1.4
Layouts
Use this menu to save the current and recall previous layout. You may save 8 sets of
parameters. You can use the push buttons (P1-P8) to select from the Layouts only if you are not
navigating in the main menu.
3.1.5
User Presets
Use this menu to save the current and recall previous input and output settings of the device.
You may save 4 sets of parameters. You can use the push buttons (P1-P8) to select from the
Presets only if you are not navigating in the main menu.
3.2
Setup through Web Browser
The matrix switcher can be configured and set up by the Web application program. Please
connect this device to a network. LAN Communication format:
Category
Data
Physical Layer
Ethernet 10/100 Mbps interface (802.3)
Network Layer
TCP/IP
Port
6474 (Communication Control Port)
80 (HTTP)
Initial IP Address
192.168.1.104
Initial Sub Network Mask
255.255.255.0
Initial Gateway IP Address
192.168.1.1
Username
admin
Default Password
dexon (adjustable via web in advanced panel)
