LED on the wheel of the mouse will flash frequency when moving or clicking the
mouse. Although the mouse can still work for a while, the user, at this time,
should have a new set of batteries ready for replacement as soon as possible.
POWER ON/OFF MOUSE
DC103 designed for power saving, you can power ON/OFF by sliding
ON/OFF switch on the mouse bottom.
OPERATIONS ON POWER SAVING MODE
In order to conserve battery power, the mouse is designed to reduce power
consumption gradually from standby mode to sleep mode, if it is not being used.
Standby mode – Around 1 second after the mouse stops moving, it enter into
standby mode.
Sleep mode – If the mouse is left intact for around 8 minutes, it goes to sleep
mode and shuts down the optical sensor to maintain minimum power
consumption. No moving operation is possible in this mode.
Wake up the mouse – This mouse can work promptly under Standby mode so
users might not be able to tell the existence of this mode. But, in sleep mode,
users have to press any button to wake up the mouse for normal operation.
RECEIVER STORAGE
For travel and loss prevention, store receiver in cavity on the bottom of the
mouse.
