7
Safety instructions
DE-M060304E • DEWE-ORION-1616-10x • Technical Reference Manual • Printing version 1.2.0 • March 19, 2014
Safety instructions for all DEWETRON DAQ boards
The DEWETRON data acquisition boards may only be installed by experts.
Read your manual before operating the board.
Observe local laws when using the board.
DO NOT operate the product in an explosive atmosphere or in the presence of flammable gases or
fumes.
DO NOT operate damaged equipment: Whenever it is possible that the safety protection features built
into this product have been impaired, either through physical damage, excessive moisture, or any
other reason, REMOVE POWER and do not use the product until safe operation can be verified by
service-trained personnel. If necessary, return the product to a DEWETRON sales and service office
for service and repair to ensure that safety features are maintained.
Keep away from live circuits: Operating personnel must not remove equipment covers or shields.
Procedures involving the removal of covers or shields are for use by service-trained personnel only.
Under certain conditions, dangerous voltages may exist even with the equipment switched off. To
avoid dangerous electrical shock, DO NOT perform procedures involving cover or shield removal
unless you are qualified to do so.
DO NOT try to service or adjust the board.
DO NOT substitute parts or modify equipment.
Before opening the instrument or computer (experts only) disconnect power!
Don’t touch internal wiring (electrostatic damage is possible).
Don’t use higher supply voltage than specified!
Use only original plugs and cables for harnessing.
Safety of the operator and the unit depend on following these rules.
Using the board for medical applications only at owner’s risk
Содержание DEWE-ORION-1616-10 Series
Страница 56: ...C2 Notes...