Dewetron DEWE-ORION-1616-10 Series Скачать руководство пользователя страница 34

Страница: 34 / 56

Page 34

DEWE-ORION-1616-10x

2.9 Synchronizing multiple boards

2.9.1 Internal synchronization

For multiple device operation the DEWE-ORION-1616-10x is equipped with an additional synchronization

connector. A standard 10-pin connector with 1.27 mm flat ribbon cable is available for easy connection be

tween the boards.

DEW

-ORION-1616

DEW

-ORION-1616

DEWE-ORION-1616

DEW

-ORION-1616

DEW

-ORION-1616

Slave
Master

Figure 8: Internal synchronization

2.9.2 Synchronizing multiple systems

If multiple systems or PCI expansion systems are used, a synch-bus amplifier (ORION-1616-SYNCH) have

to be used. This amplifier decouples the internal synch-bus with the external synchronization input and out

put connector. By changing the internal TTL synch bus levels from TTL to RS-422 level the distance between

two systems can be increased by up to 50 metres by using standard CAT5 Ethernet cables.

Please contact DEWETRON if longer synchronization distance is required!

The ORION-1616-SYNCH also includes the security circuit if two master systems have to be connected

together over the synch bus connection. As soon as the system is configured to a master system the external

synch is ignored by disabling the SYNCH-IN amplifier. The LED MI (master internal) indicates if the system

is configured to a master system. ME (master external) is on, if at the SYNCH-IN connector a valid SYNCH

signal is connected.

DEWE-ORION-1616

DEW

-ORION-1616

DEW

-ORION-1616

DEWE-ORION-1616

Collision

detect

Internal synch bus

DEWE-ORION-1616

(TTL-level)

Synch out (RS-422)

Synch in (RS-422)

ME MI

Figure 9: Synchronizing multiple systems

Содержание DEWE-ORION-1616-10 Series

























































Результаты поиска

Содержание DEWE-ORION-1616-10 Series

Отзывы:

Похожие инструкции для DEWE-ORION-1616-10 Series

Бренды по названию

Популярные бренды

Dewetron DEWE-ORION-1616-10 Series, Техническое справочное руководство

Результаты поиска

Содержание DEWE-ORION-1616-10 Series

Отзывы:

Похожие инструкции для DEWE-ORION-1616-10 Series

Бренды по названию

Популярные бренды