VIBRO KIT
TECHNICAL REFERENCE MANUAL
3 Technical data
3.1 Introduction
The new VIBRO-KIT is a compact tool for simulating rotating machinery measurements. It is meant for
demonstrations or educational purposes such as in a lab or university. It provides a playground for
almost unlimited experiments.
It's made of solid aluminum. It’s built of a small electric motor with a simple control panel, two bearings,
two optical strip-tape angle sensors, two encoders and two different couplings on each side. One is rigid
and the other is made of spring.
The RPM can be controlled manually by a turn knob, or you can completely define ramps, cycles, etc.
with the built-in display.
Furthermore, an external analog voltage (or even PWM signal) can be used to control the RPM.
Functionalities:
●
Manual RPM control (turn knob, display)
●
Definable ramps (runup, coast down, hold time and multiple cycles)
●
RPM control by external voltage (e.g. step curve)
●
External PWM input
●
Different angle sensors (2 optical strip tape, 2 Encoders)
3.2 Scope of supply
Type
Quantity
Description
Vibro-kit
1
Vibro-kit unit
BNC-BNC
1
BNC to BNC connector cable of 1,2 m
L1B7m-BNC
2
7 pin LEMO to BNC connector cable of 0,6 m
BALANCING SCREWS
kit
Screws 10pcs M3x4, 10pcs M3x6, 10 pcs M3x8, 10pcs M3x10
Nuts 20pcs M3x2.3
** Power supply adapter is not included
VIBRO KIT V20-1
5/29
