DewertOkin ID21, Руководство по установке

Страница: 58 / 96

Operating the control keypads System ID21
58 78438 7.0

The display on the HSU control keypad is a three-character positional and information dis-
play.

Using the keys for upwards or downwards adjustments: Press and hold the corresponding
key until the desired position is reached.
8.4.2 Advanced functions
Saving a position
Any table position can be saved using this function.

When the control unit is turned on for the first time, all positions are equal to the smallest
table position (the lower end position).

Only one table position can be stored per memory key.
To save a position, proceed as follows:
1 Move the table to the position that you want to save.
073
The position is shown on the display (e.g. 73 cm).
2 Press the green Save key.
5 -
S -
is now shown on the display.
3 Press the desired memory key (e.g. 2).
5 2
S 2 is shown on the display.
4 The set table position is now saved for the selected memory key.
A double-click noise can then be heard. After about 2 seconds, the saved
table position is displayed.
Adjusting the table to a saved height position
This function allows you to set the table to a saved table position.
1 Press and hold the memory key that corresponds to the desired table po-
sition (e.g. position 2).
The table will move as long as the memory key is pressed. If you release
this key before the saved position is reached, the table will stop before it
reaches this position.
2 Release the key when the table has reached the saved position.
073
The current (saved) position is shown on the display.