dewert okin LED-LICHTLEISTE, Руководство по установке

Страница: 9 / 18

LED-LICHTLEISTE Installation
80902(a) 25.11.2015 9
5. Installation
5.1 Safety notices to observe during installation
Basic safety rules must be followed in order to ensure that can be continually operated in a safe
manner. These rules must be observed while using and installing the LED-LICHTLEISTE to the
end product.
5.2 Installation procedure
Before installing and connecting the LED-LICHTLEISTE, make sure that you are observing all of
the safety notices found in the "Safety notices to observe during installation" section.

Before you use the LED-LICHTLEISTE for the first time, check that the cables are in good
condition. They must not be used if you detect any damage; contact your dealer or supplier.
5.2.1 Connecting the LED LICHTLEISTE together
CAUTION
You should only connect and disconnect the cables when they are completely disconnected from
any live current!
The LED-LICHTLEISTE can be connected in two different ways.
Make the connections as follows (also refer to Figures 4 and 5):
Variant 1: Two, three or four LED-LICHTLEISTE can be plugged in directly to each other.
Fig. 4: Connection of the LED-LICHTLEISTE
1 Plug the adapter cable into a LED-LICHTLEISTE until you hear it click into place.
2 Plug in the other LED-LICHTLEISTE until you hear them click into place (up to four can be
connected).