DeWalt XR Li-Ion DCF610-XE Скачать руководство пользователя страница 12

Страница: 12 / 16

WARNING:

Never use solvents or other harsh chemicals for cleaning the

non-metallic parts of the tool. These chemicals may weaken the plastic materials

used in these parts. Use a cloth dampened only with water and mild soap. Never let

any liquid get inside the tool; never immerse any part of the tool into a liquid.

CHARGER CLEANING INSTRUCTIONS

WARNING:

Shock hazard. Disconnect the charger from the AC outlet before

cleaning. Dirt and grease may be removed from the exterior of the charger using a

cloth or soft non-metallic brush. Do not use water or any cleaning solutions.

Repairs

The charger and battery pack are not serviceable. There are no serviceable parts

inside the charger or battery pack.
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment

(including brush inspection and replacement) should be performed by certified

service centers or other qualified service organizations, always using identical

replacement parts.

ACCESSORIES

WARNING:

Since accessories, other than those offered by D

WALT, have not been

tested with this product, use of such accessories with this tool could be hazardous.

To reduce the risk of injury, only D

WALT, recommended accessories should be used

with this product.

Recommended accessories for use with your tool are available at extra cost from

your local service center. If you need any assistance in locating any accessory, please

contact Stanley Black & Decker, 82 Taryn Drive, Epping, VIC 3076 Australia or call

1800 444 224 or (NZ) 0800 339 258.

Содержание XR Li-Ion DCF610-XE

















Результаты поиска

Содержание XR Li-Ion DCF610-XE

Отзывы:

Похожие инструкции для XR Li-Ion DCF610-XE

Бренды по названию

Популярные бренды

DeWalt XR Li-Ion DCF610-XE, Инструкция по эксплуатации

Результаты поиска

Содержание XR Li-Ion DCF610-XE

Отзывы:

Похожие инструкции для XR Li-Ion DCF610-XE

Бренды по названию

Популярные бренды