DeWalt XR LI-ION DCB090, Оригинальное руководство пользователя

Страница: 45 / 136

ENGLISH
43
cavities. Always unplug the charger from the power supply
when there is no battery pack in the cavity. Unplug charger
before attempting to clean.
• DO NOT attempt to charge the battery pack with any chargers
other than the ones in this manual. The charger and battery
pack are specifically designed to work together.
• These chargers are not intended for any uses other than
charging D
E
WALT rechargeable batteries. Any other uses may
result in risk of fire, electric shock or electrocution.
• Do not expose charger to rain or snow.
• Pull by plug rather than cord when disconnecting charger.
This will reduce risk of damage to electric plug and cord.
• Make sure that cord is located so that it will not be stepped
on, tripped over or otherwise subjected to damage or stress .
• Do not use an extension cord unless it is absolutely necessary.
Use of improper extension cord could result in risk of fire, electric
shock or electrocution.
• When operating a charger outdoors, always provide a dry
location and use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric
shock.
• Do not block the ventilation slots on the charger. The
ventilation slots are located on the top and sides of the
charger
. Place the charger in a position away from any heat
source.
• Do not operate the charger with damaged cord or plug —
have them replaced immediately.
• Do not operate charger if it has received a sharp blow, been
dropped or otherwise damaged in any way.
Take it to an
authorised service centre.
• Do not disassemble the charger; take it to an authorised
service centre when service or repair is required. Incorrect
reassembly may result in a risk of electric shock, electrocution or
fire.