background image

Set DCS Privacy Codes

 

To select a DCS privacy code:

 

1.

 After selecting a channel, press the 

Mode 

button until 

the DCS icon appears and the small numbers flash on 
the display (00 through 83).

    

2.

 Press using the 

Up 

or 

Down

 button to select a DCS privacy code. You can 

hold the 

Up

 or 

Down

 button for fast advance.

3.

 When DCS privacy code is displayed, choose one of the following:

 

a.

 Press the 

Mode 

button to enter the new setting and proceed to other 

functions.

 

b.

 Press the 

Talk 

button to return to 

Standby

 mode.

 

c.

 Do not press any buttons for 6 seconds to enter the new settings and to 

return to 

Standby

 mode.

Set CTCSS Privacy Codes

 

To select a CTCSS privacy code:

 

1.

 After selecting a channel, press the 

Mode 

button until 

the 

CTCSS

 icon appears and the small numbers next 

to the channel number flash on the display.

 

2.

 Press using the 

Up

 or 

Down 

button to select a privacy 

code. You can hold the 

Up

 or 

Down

 button for fast 

advance.

3.

 When your desired CTCSS privacy code is displayed, choose one of the 

following:

a.

 Press the 

Mode 

button to enter the new setting and proceed to other 

functions.

b.

 Press the 

Talk

 button to return to 

Standby

 mode.

c.

 Do not press any buttons for 6 seconds to return to 

Standby

 mode.

 

 

To successfully communicate using a privacy code, both 

the sending and receiving radios must be tuned to the same

channel and to the same privacy code system (CTCSS or DCS)

and privacy code number. Each channel will remember the

last privacy code system and number you select.

The privacy code 00 is not a privacy code, but allows all

signals to be heard on a channel that is set to 00 on both

the CTCSS and DCS systems.

Privacy Code

DCS Privacy Code

Up/Down Button

Up/Down Button

9

10

If DCS is turned on at the channel selected, the 

display will flash the CTCSS icon and “OFF.” 

To switch from DCS to CTCSS, press the 

Up

 or 

Down

 button while the display is flashing 

“OFF.” The display will then show the small 

numbers flashing and you will then be able to 

proceed to step 2.

If CTCSS is turned 

on

 at the channel selected, 

the display will flash the DCS icon and “OFF.” 

To switch from CTCSS to DCS, press the 

Up

 

or 

Down

 button while the display is flashing 

“OFF.” The display will then show the small 
numbers flashing and you will then be able to 

proceed to step 2.

Mode Button

Mode Button

Содержание DXFRS300













Отзывы: