background image

Battery Low   

 

When battery power is low, the final bar in the 

 

Battery Low

 icon will blink and an audible tone will  

 

sound twice before the radio shuts off. Your batteries  

 

need to be recharged.

Auto Battery Save   

 

If there are no transmissions within 10 seconds, the  

 

radio will automatically switch to 

Battery Save

 mode  

 

and the 

Power Saver

 icon will flash in the display. 

 

This will not affect the radio’s ability to receive  

 

incoming transmissions.

3

4

Battery Low

The radio will display flashing battery icon

while charging if the radio is on.

Battery Save Mode

Operation

Using Your Radio

Turning on Your Radio 

Turn         clockwise to turn the radio on and counterclockwise to turn the 

radio off.

1.  In the ON position, the radio chirps and briefly shows all feature icons 

available on the radio.

2.  The display screen then shows the current channel, code and all features 

that are enabled.

Quick Start

1. Turn On/Off VOL Knob clockwise to turn the radio on and counter 

clockwise to turn the radio off.

2.

 Select a desired channel.

3.

 Press and hold the 

Talk

 button while speaking into the microphone.

4.

 When finished talking, release the 

Talk 

button and listen for a 

response.

Both radios must be tuned to the same

channel/privacy code to communicate.

For charging radio(s) in desktop charger:

1.

 Insert radio(s) into desktop charger as shown. 

2.

 Insert the micro-USB cable into jack on back of charger.

3.

 Plug the cable into USB compatible power port. For 

pluggable equipment, the socket-outlet shall be 

installed near the equipment and shall be easily  

 accessible.

If charging light is not 

on

, check position of radio. Radio should be upright. 

The charge indicator light will stay 

on

 as long as the radio is in the charging 

mode, and the light will go 

off

 when charging is complete.

Note: 

To charge a single radio, you can bypass the desktop charger and 

simply insert the micro-USB’s connector directly into the charge jack 

located on the left side of the radio.

The radio will display flashing battery icon while charging.

D

E

WALT recommends your radio be turned 

off

 while being charged.

Содержание DXFRS300













Отзывы: