E N G L I S H
27
u. DWV9210-XJ connector kit (includes DWV9000,
DWV9120, DWV9130)
ANTI-STATIC HOSE OPTION
The DWV902L and DWV902M are each equipped
with an anti-static grounding system. An anti-static
hose must be purchased at extra cost from your
authorised service center. This hose (DWV9316-XJ)
fits into the dust extractor system the same way as
the standard hose. To contact your seller or check
the location of your nearest authorised D
E
WALT
repair agent in the D
E
WALT catalogue or contact
your D
E
WALT office at the address indicated in this
manual.
INTENDED USE
These vacuums are used for fine particulate pick-up,
like wallboard, concrete or surface dust.
DWV902L
This appliance can be used as industrial vacuum
cleaner and dust extractor for mobile operations to
take up all types of dry, non-combustible dusts up
to dust Class L with limit values for occupational
exposure greater than 1 mg/m³.
DWV902M
This appliance can be used as industrial vacuum
cleaner and dust extractor for mobile operations to
take up all types of dry, non-combustible dusts up
to dust Class M with limit values for occupational
exposure greater than or equal to 0.1 mg/m³.
DO NOT
use in rain or in presence of flammable
liquids or gases.
These heavy-duty vacuums are for professional
use.
DO NOT
let children come into contact
with this appliance. Supervision is required when
inexperienced operators use this appliance.
DO NOT
use the dust extractor for combustible
dust.
DO NOT
use the dust extractor in explosive
atmospheres.
NOTE:
This appliance is suited for the commercial
use, e.g. in hotels, schools, hospitals, factories,
shops, offices, rental companies, and on
construction sites.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
WARNING:
115 V units have to
be operated via a fail-safe isolating
transformer with an earth screen
between the primary and secondary
winding.
If the supply cord is damaged, it must be replaced
by D
E
WALT service organisation by a specially
prepared cord which is available through the
D
E
WALT service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
WARNING:
No connection is to be
made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved
3–core extension cable suitable for the power
input of this appliance (see
Technical Data
).The
minimum conductor size is 1.5 mm
2
; the maximum
length is 30 m.
When using a cable reel, always unwind the cable
completely.
ASSEMBLY AND ADJUSTMENTS
(FIG. 1–3)
WARNING: To reduce the risk
of injury, turn appliance off and
disconnect appliance from power
source before installing and
removing accessories, before
adjusting or changing set-ups or
when making repairs.
An accidental
start-up can cause injury.
Содержание DWV902L
