DeWalt DWM120, Оригинальное руководство пользователя

Страница: 8 / 9

ENGLISH
8
@ WARNING: Never attempt to use this tool by resting it upside
down on a work surface and bringing the material to the tool.
Always securely clamp the workpiece and bring the tool to the
workpiece, securely holding the tool with two hands as shown in
Figure 6.
2. If additional light is needed, a sight light (B) can be activated using
the sight light switch (P) as shown in Figure 1. If replacement is
required, return to an authorized service center or other qualified
service personnel, always using identical replacement parts.
@ WARNING: To reduce the risk of electric shock, DO NOT use the
tool if LED lens is broken.
3. Bring the work stop (E) into contact with the workpiece. Turn the
saw ON.
4. When saw reaches desired rotation speed, slowly and gently tilt
the main body of the tool to bring the band saw blade into contact
with the workpiece. Do not apply additional pressure in excess of
the weight of the main body of the tool. Carefully avoid bringing the
band saw blade suddenly and heavily into contact with the upper
surface of the workpiece. This will cause serious damage to the
band saw blade. To obtain maximum service life of the band saw
blade, ensure there is no sudden impact at the beginning of the
cutting operation.
5. As shown in Figure 6, straight cutting can be accomplished by
keeping the band saw blade aligned with the side surface of the
motor housing. Any twisting or cocking of the blade will cause the
cut to go offline and decrease the life of the blade.
CAUTION: During cutting, if the band saw becomes locked or
jammed in the workpiece material, release the switch immediately
to avoid damage to the band saw blade and motor.
6. The tool’s own weight provides the most efficient downward
cutting pressure. Added operator pressure slows the blade and
reduces blade life.
7. End pieces, which would be heavy enough to cause injury when
they drop, after cut-off, should be supported. Safety shoes are
strongly recommended. End pieces may be hot.
8. Hold the saw firmly in both hands so that the saw does not fall
against clamped or supported material when the cut is completed.
DO NOT MAKE ANY SPEED CHANGES UNLESS TOOL HAS
BEEN TURNED OFF.
Tips for Better Cutting
The following recommendations should be used as a guide. Results
may vary with the operator and the particular material being cut.
• Never twist the band saw blade during cutting operation.
• Never use liquid coolants with portable band saws. Use of liquid
coolants will cause build-up on tires and reduce performance.
• If excessive vibration occurs during the cut, turn the bandsaw off
and adjust the speed slightly. Ensure that the material being cut is
is securely clamped down. If vibration continues, change the band
saw blade.
MAINTENANCE
@ WARNING: To reduce the risk of serious personal injury,
turn tool off and disconnect tool from power source before
making any adjustments or removing/installing attachments or
accessories. An accidental start-up can cause injury.
Lubrication
Self-lubricating bearings are used in the tool and periodic
relubrication is not required. In the unlikely event that service is ever
needed, take your tool to an authorized service location.
Cleaning
@ WARNING: Blow dirt and dust out of all air vents with dry air at
least once a week.
@
WARNING: Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool. These chemicals may
weaken the materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments (including brush inspection and replacement)
should be performed by a DEWALT factory service center, a
DEWALT authorized service center or other qualified service
personnel. Always use identical replacement parts.
ACCESSORIES
@ WARNING: Since accessories, other than those offered by
DEWALT, have not been tested with this product, use of such
accessories with this tool could be hazardous. To reduce the risk
of injury, only DEWALT, recommended accessories should be used
with this product.Recommended accessories for use with your
tool are available at extra cost from your local dealer or authorized
service center.