Tool Specifications
MODEL
DWF83C
HEIGHT
12.5" (317.5 mm)
WIDTH
4.95" (125.7 mm)
LENGTH
14.1" (358.5 mm)
WEIGHT
8.5 lb (3.85 kg)
NOSE TO WALL DISTANCE
2.5" (64 mm)
RECOMMENDED OPERATING
PRESSURE
70 - 120 psig
AIR CONSUMPTION PER 100
CYCLES
6.5 cfm
@ 80 psi
LOADING CAPACITY
1 Coil (200-300 Nails)
Nail Specifications
NOTE:
Use only D
e
WALT approved fasteners.
MODEL
DWF83C
NAIL LENGTHS
2" - 3-1/4"
(50 mm - 83 mm)
SHANK DIAMETERS
.113" - .131"
(2.8 mm - 3.3 mm)
FASTENER COLLATION
15° Coil
NAIL TYPE
15° Round Head
OPERATION
Preparing the Tool (Fig. 2, 3)
WARNING:
Read the section titled
Important Safety Instructions
at the beginning of this manual. Always wear eye and ear protection
when operating this tool. Keep the nailer pointed away from yourself
and others. For safe operation, complete the following procedures
and checks before each use of the nailer.
1. Before you use the nailer, be sure that the compressor tanks
have been properly drained.
2. Lubricate the tool following these directions:
a. Use D
e
WALT pneumatic tool oil or a non-detergent S.A.E. 20
weight oil.
DO NOT
use detergent oil or additives as they will
damage o-rings and rubber parts.
b.
Use a filter-regulator-lubricator in the air line between the
compressor and the tool when possible.
c. If a lubricator is not available, add 5 to 10 drops of oil in the air
fitting a least twice a day or every 4 hours of use.
FIG. 2
FIG. 3
3. Wear proper eye, hearing and respiratory protection.
English
6
