DeWalt DWE560-XE, Инструкция по эксплуатации

Страница: 9 / 20

7
check the condition and operation of the lower blade guard to assure that it is
working properly. Make sure it moves freely and does not touch the blade or any
other part, in all angles and depths of cut.
NOTE: The 20 mm side of the inner clamp washer (O) MUST face outward toward
the blade to fit blades with 20 mm arbors properly.
C
FIG. 4
K
I
FIG. 3
2. Place outer clamp washer (N) on saw spindle with the large flat surface against the
blade and the wording on the outer clamp washer facing you.
3. Thread blade clamping screw (J) into saw spindle by hand (screw has right-hand
threads and must be turned clockwise to tighten).
4. Depress the blade lock (C) while turning the saw spindle with the blade wrench
until the blade lock engages and the blade stops rotating.
5. Tighten the blade clamping screw firmly with the blade wrench.
NOTE: Never engage the blade lock while saw is running, or engage in an effort to
stop the tool. Never turn the saw on while the blade lock is engaged. Serious damage
to your saw will result.
TO REPLACE THE BLADE (FIG. 2–4)
1. To loosen the blade clamping screw (J), depress the blade lock (C) and turn the
saw spindle with the blade wrench until the blade lock engages and the blade
stops rotating. With the blade lock engaged, turn the blade clamping screw
counterclockwise with the blade wrench (screw has right-hand threads and must
be turned counterclockwise to loosen).
2. Remove the blade clamping screw (J) and outer clamp washer (N). Remove old
blade.
3. Clean any sawdust that may have accumulated in the guard or clamp washer
area and check the condition and operation of the lower blade guard as previously
outlined. Do not lubricate this area.
4. Select the proper blade for the application (refer to Recommended Blade Types
under Blades ). Always use blades that are the correct size (diameter) with the
proper size and shape center hole for mounting on the saw spindle. Always
assure that the maximum recommended speed (rpm) on the saw blade meets or
exceeds the speed (rpm) of the saw.
5. Follow steps 1 through 5 under To Install the Blade , making sure that the blade
will rotate in the proper direction.
LOWER BLADE GUARD
WARNING: The lower blade guard is a safety feature which reduces the risk of
serious personal injury. Never use the saw if the lower guard is missing, damaged,
misassembled or not working properly. Do not rely on the lower blade guard to
protect you under all circumstances. Your safety depends on following all
warnings and precautions as well as proper operation of the saw. Check lower
guard for proper closing before each use as outlined in Additional Safety Rules for
Circular Saws . If the lower blade guard is missing or not working properly, have
the saw serviced before using. To assure product safety and reliability, repair,
maintenance and adjustment should be performed by an authorized service center
or other qualified service organization, always using identical replacement parts.
Cutting Depth Adjustment
LOOSEN
TIGHTEN
P
FIG. 5
(Fig. 5–7)
Your saw is equipped with a carbide
tipped saw blade for long life and
efficient cutting.
Setting the saw at the proper cutting
depth keeps blade friction to a
minimum, removes sawdust from
between the blade teeth, results in
cooler, faster sawing and reduces
the chance of kickback.