DeWalt DWE560-XE страница 8 Скачать руководство пользователя

Страница: 8 / 20

FIG. 1

DWE560-XE

B A

A. Trigger switch

H. Foot plate

B. Main handle

I. Lower blade guard

C. Blade lock

J. Blade clamping screw

D. End cap

K. Lower guard lever

E. Auxiliary handle

L. Upper blade guard

F. Bevel adjustment lever/knob

M. Lock-off button

G. Bevel angle adjustment mechanism

INTENDED USE

These heavy-duty circular saws are designed for professional wood cutting

applications.

DO NOT

use water feed attachments with this saw.

DO NOT

use abrasive

wheels or blades.

DO NOT

use under wet conditions or in presence of flammable

liquids or gases.

These heavy-duty saws are professional power tools.

DO NOT

let children come into

contact with the tool. Supervision is required when inexperienced operators use this

tool.

ADJUSTMENTS

Changing Blades

WARNING: To reduce the risk of serious personal injury, turn tool off and

disconnect tool from power source before making any adjustments or removing/

installing attachments or accessories.

An accidental start-up can cause injury.

TO INSTALL THE BLADE (FIG. 2–5)

WARNING:

The inner flange has a 20 mm diameter on one side and a 19 mm

diameter on the other. The 19 mm diameter side is marked 19, and the 20 mm

diameter side is marked 20. Use the correct side for the hole diameter of the blade

you intend to use. Mounting the blade on the wrong side may result in dangerous

vibration.

FIG. 2

1. Using the lower guard lever (K), retract the lower blade guard (I) and place blade

on saw spindle against the inner clamp washer (O), making sure that the blade will

rotate in the proper direction (the direction of the rotation arrow on the saw blade

and the teeth must point in the same direction as the direction of rotation arrow on

the saw). Do not assume that the printing on the blade will always be facing you

when properly installed. When retracting the lower blade guard to install the blade,

Содержание DWE560-XE





















Результаты поиска

Содержание DWE560-XE

Отзывы:

Похожие инструкции для DWE560-XE

Бренды по названию

Популярные бренды

DeWalt DWE560-XE, Инструкция по эксплуатации

Результаты поиска

Содержание DWE560-XE

Отзывы:

Похожие инструкции для DWE560-XE

Бренды по названию

Популярные бренды