DeWalt DW911, Руководство пользователя

Страница: 17 / 64

E N G L I S H
13 en - 4
After the battery has cooled, the charger
automatically switches to the pack charging mode.
This feature ensures maximum battery life. The red
indicator (6) blinks long, then short while in the Hot
Pack Delay mode.
Radio operation
Volume control (fig. A)
• Turn the volume control (1) to the desired level.
Mode selection (fig. A & B)
• Turn the mode selector (2) to the desired mode:
AM, FM or FM stereo. The power light (9) will be lit.
• To switch the radio/charger off, turn the mode
selector to the setting off.
Station selector (fig. A & B)
• Turn the station selector (3) to the desired
frequency setting, which is indicated by the
pointer (10).
In the FM stereo mode, the stereo indicator (8) will
be lit in case of stereo reception.
Battery operation
The radio may be operated on battery power.
The running time depends on the battery type and
voltage.
Maintenance
Your D
E
WALT Charger has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper care and regular cleaning.
Cleaning
• Unplug the charger before cleaning the housing
with a soft cloth.
• Keep the ventilation slots clear and regularly
clean the housing with a soft cloth.
Environment
Battery pack
The long life battery pack must be recharged when it
fails to produce sufficient power on jobs which were
easily done before. At the end of its technical life,
discard it with due care for our environment:
• Run the battery pack down completely,
then remove it from the tool.
• NiCd and NiMH cells are recyclable. Take them
to your dealer or a local recycling station.
The collected battery packs will be recycled or
disposed of properly.
Charger
At the end of its technical life, take your charger to
an authorized D
E
WALT repair agent where it will be
disposed of in an environmentally safe way.