E N G L I S H
17
en - 4
• Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable firmly and that the two
leads are correctly fixed at the terminal screws.
Never use a light socket.
Never connect the live (L) or neutral (N)
wires to the earth pin marked E or
.
For 115 V units with a power rating exceeding 1500 W,
we recommend to fit a plug to BS4343 standard.
Using an extension cable
If an extension cable is required, use an approved
extension cable suitable for the power input of this
tool (see technical data). The minimum conductor size
is 1.5 mm
2
. When using a cable reel, always unwind
the cable completely. Also refer to the table below.
Conductor size (mm
2
)
Cable rating (Amperes)
0.75
6
1.00
10
1.50
15
2.50
20
4.00
25
Cable length (m)
7.5
15
25
30
45
60
Voltage
Amperes
Cable rating (Amperes)
115
0 - 2.0
6
6
6
6
6
10
2.1 - 3.4
6
6
6
6
15
15
3.5 - 5.0
6
6
10
15
20
20
5.1 - 7.0
10
10
15
20
20
25
7.1 - 12.0
15
15
20
25
25
-
12.1 - 20.0
20
20
25
-
-
-
230
0 - 2.0
6
6
6
6
6
6
2.1 - 3.4
6
6
6
6
6
6
3.5 - 5.0
6
6
6
6
10
15
5.1 - 7.0
10
10
10
10
15
15
7.1 - 12.0
15
15
15
15
20
20
12.1 - 20.0
20
20
20
20
25
-
Assembly and adjustment
Prior to assembly and adjustment always
unplug the tool.
Replacing the saw blade (fig. B)
• Move the blade clamp slider (6) up to release
the blade clamping mechanism.
• Insert the saw blade into the holder (5) until it
engages. The blade can be installed with the
teeth pointing down or up.
• Move the blade clamp slider (6) down to lock the
blade clamping mechanism.
• To remove the saw blade, proceed in reverse order.
Saw blades
material
recommended saw blade
ferrous metal
fine-toothed
non ferrous metal
coarse-toothed
wood
TCT saw blade
plastic
fine-toothed
masonry
carbide-tipped
A wide variety of dedicated saw blades is available
as an option.
Always select your saw blade with great
care.
Setting the adjustable saw shoe (fig. C)
The saw shoe can be adjusted to limit the depth of
cut and prolong the life of your saw blade.
• Push and hold the release button (3).
• Slide the saw shoe (2) into the desired position.
• Release the button.
Instructions for use
• Always observe the safety instructions
and applicable regulations.
• Ensure the material to be sawn is
secured in place.
• Apply only a gentle pressure to the tool
and do not exert side pressure on the
saw blade. If possible, work with the saw
shoe pressed against the workpiece.
This prevents damage to the blade and
stops the tool from jerking and vibrating.
Содержание DW307MK
