DeWalt DW266-XE, Инструкция по эксплуатации

Страница: 8 / 12

6
Lubrication
All ball and needle bearings are factory lubricated for the life of the bearing.
CLUTCH LUBRICATION
1. Remove clutch housing by unscrewing (left-hand thread).
2. Lightly brush clutch faces.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement) should be performed by certified
service centers or other qualified service organizations, always using identical
replacement parts.
Accessories
WARNING: Since accessories, other than those offered by D
E
WALT, have not been
tested with this product, use of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
E
WALT recommended accessories should be used
with this product.
Recommended accessories for use with your tool are available at extra cost from your
local service center. If you need any assistance in locating any accessory, please con-
tact Stanley Black & Decker, 82 Taryn Drive, Epping, VIC 3076 Australia or call 1800
338 002 or (NZ) 0800 339 258.