background image

 

Schleissheimer Straße 181 C | DE – 80797 Munich | phone +49 89 360 55 10-0 | www.ambient.de/en | [email protected] 

© 2020, Ambient Recording GmbH

 

 

    

 

 

 

Universal Microphone Power Supply 

 

 

 

Instruction Manual 

 

Содержание UMP III

Страница 1: ...Schleissheimer Straße 181 C DE 80797 Munich phone 49 89 360 55 10 0 www ambient de en info ambient de 2020 Ambient Recording GmbH Universal Microphone Power Supply Instruction Manual ...

Страница 2: ...om in and slide right direction MIC connector Insert battery with the polarity protection gap to the left when looking at the front Close the door and push back to the left Power on Plug in the Mic In cable The device can only be switched on with the Mic In cable connected Press the button until the LED turns from red to green release The LED will now display the current power setting ...

Страница 3: ...briefly tap the button The Led will blink in the color of the active setting Changing the power setting Alternate between 48V and 12V Phantom briefly tap the button twice The unit will light up the setting it would switch to If you want to confirm tap while LED is lit to cancel wait The unit will now blink 3 times in the color of the now active mode Enabling T Power tap 3 times The LED will light ...

Страница 4: ...by tapping the button Connectors MIC input Pin 1 GND Pin 2 Signal hot 12V on T Power Pin 3 Signal cold Pin 4 Battery negative must be bridged to pin 1 TX output Pin 1 GND Pin 2 Signal hot Pin 3 Signal cold Technical Details Dimensions WHD 44 mm x 66 mm x 20 mm Weight incl battery 100 g Material pearl blasted aluminum matte black anodized Powering 48 V Phantom 12 V Phantom 12 V T power Power supply...

Отзывы: