Schleissheimer Straße 181 C | DE – 80797 Munich | phone +49 89 360 55 10-0 | www.ambient.de/en | [email protected]
© 2020, Ambient Recording GmbH
Preparing the UMP III
-
Push the battery lever on the bottom in and slide right (direction MIC connector)
-
Insert battery with the polarity protection gap to the left when looking at the
front
-
Close the door and push back to the left
Power on
Plug in the Mic In cable. The device can only be switched on with the Mic In cable
connected.
Press the button until the LED turns from red to green, release. The LED will now display
the current power setting.
