•
Don’t expose power tools to rain or wet conditions.
Water entering
a power tool will increase the risk of electric shock.
•
Do not abuse the cord. Never use the cord to carry the tools or
pull the plug from an outlet. Keep cord away from heat, oil, sharp
edges or moving parts. Replace damaged cords immediately.
Damaged cords increase the risk of electric shock.
•
When operating a power tool outside, use an outdoor extension
cord marked “W-A” or “W.”
These cords are rated for outdoor use
and reduce the risk of electric shock.
Recommended Minimum Wire Size for Extension Cords
Total Length of Cord
25 ft.
50 ft.
75 ft.
100 ft.
125 ft.
150 ft.
175 ft.
7.6 m
15.2 m
22.9 m
30.5 m
38.1 m
45.7 m
53.3 m
Wire Gauge
18 AWG
18 AWG
16 AWG 16 AWG
14 AWG 14 AWG 12 AWG
PERSONAL SAFETY
•
Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use tool while tired or under
the influence of drugs, alcohol, or medication.
A moment of
inattention while operating power tools may result in serious personal
injury,
•
Dress properly. Do not wear loose clothing or jewelry. Contain
long hair. Keep your hair, clothing, and gloves away from moving
parts.
Loose clothes, jewelry, or long hair can be caught in moving
parts.
•
Avoid accidental starting. Be sure switch is off before plugging in.
Carrying tools with your finger on the switch or plugging in tools that
have the switch on invites accidents.
•
Remove adjusting keys or wrenches before turning the tool on.
A
wrench or a key that is left attached to a rotating part of the tool may
result in personal injury.
•
Do not overreach. Keep proper footing and balance at all times.
Proper footing and balance enables better control of the tool in
unexpected situations.
•
Use safety equipment. Always wear eye protection.
Dust mask,
1
English
non-skid safety shoes, hard hat, or hearing protection must be used for
appropriate conditions.
TOOL USE AND CARE
•
Use clamps or other practical way to secure and support the
workpiece to a stable platform.
Holding the work by hand or against
your body is unstable and may lead to loss of control.
•
Do not force tool. Use the correct tool for your application.
The
correct tool will do the job better and safer at the rate for which it is
designed.
•
Do not use tool if switch does not turn it on or off.
Any tool that
cannot be controlled with the switch is dangerous and must be
repaired.
•
Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing the tool.
Such
preventive safety measures reduce the risk of starting the tool
accidentally.
•
Store idle tools out of reach of children and other untrained
persons.
Tools are dangerous in the hands of untrained users.
•
Maintain tools with care. Keep cutting tools sharp and clean.
Properly maintained tools, with sharp cutting edges are less likely to
bind and are easier to control.
•
Check for misalignment or binding of moving parts, breakage of
parts, and any other condition that may affect the tools operation.
If damaged, have the tool serviced before using.
Many accidents
are caused by poorly maintained tools.
•
Use only accessories that are recommended by the manufacturer
for your model.
Accessories that may be suitable for one tool, may
become hazardous when used on another tool.
SERVICE
•
Tool service must be performed only by qualified repair
personnel.
Service or maintenance performed by unqualified
personnel could result in a risk of injury.
•
When servicing a tool, use only identical replacement parts.
Follow instructions in the Maintenance section of this manual.
Use of unauthorized parts or failure to follow Maintenance Instructions
606564/DW151 10/1/02 10:20 AM Page 1
