DS500 Quick Setup & Installation Guide
Refer to the complete DS500 instruction manual for more details.
NOTE:
The MOBILELOCK
TM
website and phone menu is subject to change.
3
CUSTOMIZE ALARM SETTINGS
(www.dewalt.com/mobilelock or 1-410-329-9477)
1.
Vibration Sensor
: Select
On
or
Off
. Choose the sensitivity level and the false
alarm filter settings.
2.
Door Contact Sensor
: Select
On
or
Off
.
3.
Temperature Sensor
: Select
On
or
Off
. Select temperature threshold. Choose
between the high, low or both temperature sensors.
4.
Tamper Sensor:
Select
On
or
Off
.
5.
Motion Detector:
Select
On
or
Off
.
(Available in the DS510 combo kit only.)
6. Choose to keep the alarm on or make it silent.
4
ATTACH THE MOBILELOCK™ UNIT TO ASSET
Use the magnets on the back of the
3/8" (9.5 mm)
MOBILELOCK
TM
unit, two #8 screws (not includ-
ed) or two bolts (not included) as appropriate
for the material to which it is affixed. To eliminate
false alarms, be sure that the MOBILELOCK
TM
unit is secure or hidden so it is not removed.
If using the door contact sensor, place the mag-
net on the door jam no more than 3/8" (9.5 mm)
from the magnet icon on the left side of the
MOBILELOCK
TM
unit (mounted on the door).
NOTE:
Please refer to the instruction manual for
detailed instructions for mounting other
MOBILELOCK
TM
accessories.
5
TEST THE SYSTEM
To test the system, go to www.dewalt.com/mobilelock or call the phone menu system
1-410-329-9477 and select
Status Update followed by System Test
from the
Unit
Customization
menu.
The MOBILELOCK
TM
system test will cycle through all the
ACTIVE
sensors in the
following order: vibration, door contact, motion, and tamper. As you trip each sensor,
the MOBILELOCK
TM
unit will sound an alarm. Wait for the siren to complete before trip-
ping the next sensor. A cellular notification will not be sent. Continue tripping sensors
until the test is complete. The test will automatically time out after 5 minutes or when
each of the sensors has been tripped.
BASIC OPERATIONS
NOTE:
The MOBILELOCK
TM
website and phone menu is subject to change.
ARMING, DISARMING AND LOCATING
Refer to the instruction manual for details on setting up an Arm and Disarm schedule.
Arm and Disarm
1.
Go to www.dewalt.com/mobilelock or call 1-410-329-9477. Login with pass-
word.
2.
Select
Arm
or
Disarm
.
Wait for confirmation that the unit has been armed.
NOTE:
If you have chosen to activate the arm and disarm confirmation chirps, the
MOBILELOCK
TM
unit will beep once to indicate the unit is armed, twice to indicate the
unit is disarmed.
Assisted GPS Locate
1. Go to www.dewalt.com/mobilelock. Login with password.
2.
Select
Locate
.
The amount of time to receive the location will vary. In most cases, the location is
provided in about one minute. Click
Location (view)
to be linked to the map.
Guía de instalación y confi guración rápida del DS500
Consulte el manual de instrucciones completo del DS500 para obtener más detalles.
NOTA:
El sitio Web y el menú telefónico de MOBILELOCK
TM
están sujetos a modifi-
caciones.
3
CONFIGURACIONES PERSONALIZADAS DE LA ALARMA
(www.dewalt.com/mobilelock o 1-410-329-9477)
1.
Sensor de vibración
: Seleccione
Encendido (On)
o
Apagado (Off)
. Elija las
configuraciones del nivel de sensibilidad y el filtro de falsas alarmas.
2.
Sensor de contacto para puertas
: Seleccione
Encendido (On)
o Apagado
(
Off)
.
3.
Sensor de temperatura:
Seleccione
Encendido (On)
o Apagado (
Off)
.
Seleccione el umbral de temperatura. Elija el sensor de temperatura alta, el de
temperatura baja o ambos.
4.
Sensor de intento de forzamiento:
Seleccione
Encendido (On)
o
Apagado
(Off)
.
5.
Detector de movimiento:
Seleccione
Encendido (On)
o Apagado (
Off).
(Disponible sólo en el juego combinado DS510.)
6. Elija mantener la alarma encendida o en silencio.
4
CONEXIÓN DE LA UNIDAD MOBILELOCK™
9,5 mm (3/8")
AL BIEN A PROTEGER
Utilice los imanes que se encuentran en la parte
posterior de la unidad MOBILELOCK
TM
, dos
tornillos nº 8 (no incluidos) o dos pernos (no
incluidos) apropiados para el material sobre
el cual deba instalar la unidad. Para eliminar
falsas alarmas, asegúrese de que la unidad
MOBILELOCK
TM
esté segura u oculta de
manera que no se pueda quitar.
2
3