DeWalt DFX560 Скачать руководство пользователя страница 6

English

4

n .........................rated speed

 ......................earthing terminal
 ......................safety alert symbol

 .....................visible radiation

 ..................... respiratory 

protection

 .....................eye protection
 .....................hearing protection
 ..................... read  all 

documentation

BATTERIES AND CHARGERS

The battery pack is not fully charged out of the carton. 
Before using the battery pack and charger, read the 
safety instructions below and then follow charging 
procedures outlined. When ordering replacement battery 
packs, be sure to include the catalog number and voltage.
Your tool uses a 

D

e

WALT

 charger. Be sure to read all safety 

instructions before using your charger. Consult the chart 
at the end of this manual for compatibility of chargers and 
battery packs.

READ ALL INSTRUCTIONS

Important Safety Instructions for All 
Battery Packs

 

WARNING: Read all safety warnings and all 
instructions for the battery pack, charger and 
power tool. Failure to follow the warnings and 
instructions may result in electric shock, fire and/
or serious injury.

• 

Do not charge or use the battery pack in explosive 
atmospheres, such as in the presence of flammable 
liquids, gases or dust.

 Inserting or removing the battery 

pack from the charger may ignite the dust or fumes.

• 

NEVER force the battery pack into the charger. DO 
NOT modify the battery pack in any way to fit into 
a non-compatible charger as battery pack may 
rupture causing serious personal injury. 

Consult 

the chart at the end of this manual for compatibility of 
batteries and chargers.

•  Charge the battery packs only in designated 

D

e

WALT

 chargers.

• 

DO NOT

 splash or immerse in water or other liquids.

• 

Do not store or use the tool and battery pack in 
locations where the temperature may reach or 
exceed 104 °F (40 °C) (such as outside sheds or metal 
buildings in summer).

 For best life store battery packs in 

a cool, dry location.

 

NOTE: Do not store the battery packs in a tool with 
the trigger switch locked on. Never tape the trigger 
switch in the ON position.

• 

Do not incinerate the battery pack even if it is 
severely damaged or is completely worn out.

 The 

battery pack can explode in a fire. Toxic fumes and 
materials are created when lithium ion battery packs 
are burned.

• 

If battery contents come into contact with the skin, 
immedicately wash area with mild soap and water. 

If battery liquid gets into the eye, rinse water over the open 
eye for 15 minutes or until irritation ceases. If medical 

attention is needed, the battery electrolyte is composed of 
a mixture of liquid organic carbonates and lithium salts.

• 

Contents of opened battery cells may cause 
respiratory irritation.

 Provide fresh air. If symptoms 

persist, seek medical attention.

 

WARNING: 

Burn hazard. Battery liquid may be 

flammable if exposed to spark or flame.

 

WARNING:

 Fire hazard. Never attempt to open the 

battery pack for any reason. If the battery pack case 
is cracked or damaged, do not insert into the charger. 
Do not crush, drop or damage the battery pack. Do 
not use a battery pack or charger that has received a 
sharp blow, been dropped, run over or damaged in 
any way (e.g., pierced with a nail, hit with a hammer, 
stepped on). Damaged battery packs should be 
returned to the service center for recycling.

Transportation

 

WARNING: Fire hazard. Do not store or carry the

 

battery pack so that metal objects can contact 
exposed battery terminals.

 For example, do 

not place the battery pack in aprons, pockets, tool 
boxes, product kit boxes, drawers, etc., with loose 
nails, screws, keys, etc. 

Transporting batteries 

can possibly cause fires if the battery terminals 
inadvertently come in contact with conductive 
materials such as keys, coins, hand tools and the 
like. 

The US Department of Transportation Hazardous 

Material Regulations (HMR) actually prohibit 
transporting batteries in commerce or on airplanes in 
carry-on baggage UNLESS they are properly protected 
from short circuits. So when transporting individual 
battery packs, make sure that the battery terminals 
are protected and well insulated from materials that 
could contact them and cause a short circuit. 

NOTE:

 Lithium-ion batteries should not be put in 

checked baggage.

shipping the 

D

e

WALT

 FlEXVOlT™ Battery

The 

D

e

WALT

 FLEXVOLT™ battery has two modes: 

Use

 and 

shipping

Use Mode:

 When the FLEXVOLT™ battery stands alone or is 

in a 

D

e

WALT

 20V Max* product, it will operate as a 20V Max* 

battery. When the FLEXVOLT™ battery is in a 60V Max* or a 
120V Max* (two 60V Max* batteries) product, it will operate 
as a 60V Max* battery. 

shipping Mode:

 When 

the cap is attached to the 
FLEXVOLT™ battery, the 
battery is in Shipping Mode. 
Strings of cells are electrically 
disconnected within the pack resulting in three batteries 
with a lower Watt hour (Wh) rating as compared to one 
battery with a higher Watt hour rating. This increased 
quantity of three batteries with the lower Watt hour rating 
can exempt the pack from certain shipping regulations that 
are imposed upon the higher Watt hour batteries.
The battery label indicates two Watt hour ratings (see 
example). Depending on how the battery is shipped, the 
appropriate Watt hour rating must be used to determine 

Содержание DFX560









































Отзывы: