DeWalt DCM572, Оригинальное руководство пользователя

Страница: 32 / 132

30
EnGLIsh
Keep bystanders away.
Directive 2000/14/EC guaranteed
sound power.
Date Code Position (Fig. J)
The date code 18 , which also includes the year of manufacture,
is printed into the housing.
Example:
2016 XX XX
Year of Manufacture
Description (Fig. A)
WARNING:
Never modify the power tool or any part of it.
Damage or personal injury could result.
1
Trigger switch
2
Speed lock lever
3
Lock-off switch
4
Handle
5
Tube
6
Battery housing
7 Battery pack (Only included with DCM572X1)
8
Battery release button
9 Large end nozzle
10
Wide end nozzle
Intended Use
Your blower has been designed for professional sweeping and
blowing applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories.
An accidental
start-up can cause injury.
WARNING: Use only D
e
WALT battery packs and chargers.
Inserting and Removing the Battery Pack
from the Tool (Fig. C–E)
nOTE: Make sure your battery pack 7 is fully charged.
To Install the Battery Pack into the Tool
1. Align the battery pack 7 with the rails inside the tool
(Fig. C).
2. Slide it into the tool until the battery pack is firmly seated
and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the release button
8
and firmly pull the battery pack
out of the tool handle (Fig. D).
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. E)
Some D
e
WALT battery packs include a fuel gauge which
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge button
11
. A combination of the three green LED lights will illuminate
designating the level of charge left. When the level of charge
in the battery is below the usable limit, the fuel gauge will not
illuminate and the battery will need to be recharged.
nOTE: The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is
subject to variation based on product components, temperature
and end-user application.
Assembly (Fig. F)
CAUTION: Ensure the lock-off switch is in the locked
position to prevent the trigger switch from moving and
the battery is removed before attaching or removing the
tube
5 . The tube must be attached to the housing 12
before use.
• TUBE assEMBLY: To attach the tube to the blower, line
up the pegs
13
on the bottom of the tube with the notch
14 on the bottom of the housing opening as shown in
figure F. Push the tube into the blower housing until the
lock engages the tube.
• Pull on the tube to ensure it is securely in place.
• To remove the tube, insert a screwdriver into the unlocking
hole 15 on the side of the housing. Lift the tab inside and
pull tube out.
Attaching Nozzles (Fig. A, G)
1. Line up the channels 16 of the desired nozzle 9 or 10
with the nubs 17 on the tube 5 .
2. Slide the nozzle onto the tube.
3. Firmly twist the nozzle to lock the nubs completely into the
recess of the nozzle. Ensure the nozzle is securely attached.