14
English
In addition to the warranty, D
e
WALT tools are covered by our:
1 year free serVICe
D
e
WALT will maintain the tool and replace worn parts caused by
normal use, for free, any time during the first year after purchase.
D
e
WaLT BaTTery PaCks
Product warranty voided if the battery pack is tampered with in any
way. D
e
WALT is not responsible for any injury caused by tampering and
may prosecute warranty fraud to the fullest extent permitted by law.
90 Day Money BaCk GuaranTee
If you are not completely satisfied with the performance of your
D
e
WALT Power Tool, Laser, or Nailer for any reason, you can return it
within 90 days from the date of purchase with a receipt for a full refund
– no questions asked.
LaTIn aMerICa:
This warranty does not apply to products sold
in Latin America. For products sold in Latin America, see country
specific warranty information contained in the packaging, call the local
company or see website for warranty information.
free WarnInG LaBeL rePLaCeMenT:
If your warning labels
become illegible or are missing, call 1-800-4-D
e
WALT (1-800-433-
9258) for a free replacement.
22 in. (559mm) HEDGE TRIMMER SER.
TYPE1 40V MAX 1550/min. 3100 CSPM
WARNING/AVERTISSEMENT/ADVERTENCIA
DEWALT INDUSTRIAL TOOL CO., BALTIMORE, MD 21286 U.S.A.
FOR SERVICE INFORMATION, CALL 1-800-4-DEWALT www.DEWALT.com MADE IN CHINA
DCHT860
TO REDUCE THE RISK OF INJURY, USER MUST READ INSTRUCTION MANUAL.
USE PROPER EYE AND RESPIRATORY PROTECTION. AFIN DE RÉDUIRE LE RISQUE
DE BLESSURES, L’UTILISATEUR DOIT LIRE LE MODE D’EMPLOI. UTILISER UNE PROTECTION OCULAIRE ET
RESPIRATOIRE ADÉQUATE. PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL
DE INSTRUCCIONES. UTILICE PROTECCIÓN ADECUADA PARA LOS OJOS Y VÍAS RESPIRATORIAS.
406A
GARDENING
APPLIANCE
TrouBLeSHooTinG
Problem
Solution
Unit will not start.
• Check battery installation.
• Check battery charging requirements.
• Check that lock off is fully pushed
down prior to moving main trigger.
Battery won’t charge. • Insert battery into charger until red
charging light illuminates. Charge up
to 8 hours if battery is totally drained.
• Plug charger into a working outlet. Refer
to
Important Charging notes
for
more details.
• Check current at receptacle by
plugging an appliance.
• Check to see if receptacle is
connected to a light switch which
turns power off when you turn out the
lights.
• Move charger and appliance to a
surrounding air temperature of above
40
°
F (4.5
°
C) or below 105
°
F
(40.5
°
C).
Slow running, noisy,
or hot blades.
• Inspect for nicks and remove is possible.
• Lubricate blades.
• Bring to a
D
e
WALT factory service
center to straighten blade, blade
support, or teeth.
• Tighten bolts on the blade.
Содержание DCHT860
Страница 2: ......
