DeWalt DCF899, Оригинальное руководство пользователя

Страница: 37 / 168

35
english
DO NOT use under wet conditions or in presence
of flammable liquids or gases.
This impact wrench is a professional power tool.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
•
Young children and the infirm. This appliance
is not intended for use by young children or
infirm persons without supervision.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities, or for lack
of experience and/or for want of knowledge or
skills unless they are supervised by a person
responsible for their safety. Children should
never be left alone to play with this product.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D
e
WALT charger is double insulated
in accordance with EN60335; therefore
no earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D
e
WALT service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
WARNING:
No connection is to be
made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 3 A.
Using an Extension Cable
An extension cord should not be used unless
absolutely necessary. Use an approved extension
cable suitable for the power input of your charger
(see Technical Data ). The minimum conductor size
is 1 mm
2
; the maximum length is 30 m.
When using a cable reel, always unwind the cable
completely.
Discard the battery pack with due care
for the environment.
Charge D
e
WALT battery packs only with
designated D
e
WALT chargers. Charging
battery packs other than the designated
D
e
WALT batteries with a D
e
WALT
charger may make them burst or lead to
other dangerous situations.
Do not incinerate the battery pack.
Package Contents
The package contains:
1 Impact wrench
1 Charger
2 Batteries
1 Kitbox
1 Instruction manual
NOTE : Battery packs, chargers and kitboxes are
not included with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fig. 1, 2)
WARNING: Never modify the power
tool or any part of it. Damage or personal
injury could result.
a. Trigger switch
b. Forward/reverse button
c. Anvil
d. Main handle
e. Battery release button
f. Battery pack
g. Worklight
h. Detent pin (DCF899, Fig. 2)
i. Hog ring (DCF899H, Fig. 2)
j. Speed selector
INTENDED USE
This impact wrench is designed for professional
impact fastening applications. The impact function
makes this tool particularly useful for driving
fasteners in wood, metal and concrete.