DeWalt DCE555, Оригинальное руководство пользователя

Страница: 36 / 156

34
EnGLIsh
Inserting and Removing the Battery Pack
from the Tool (Fig. B)
nOTE: Make sure your battery pack 9 is fully charged.
To Install the Battery Pack into the Tool Handle
1. Align the battery pack with the rails inside the tool’s
handle (Fig. B).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the battery release button 10 and firmly pull the
battery pack out of the tool handle.
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. B)
Some D
e
WALT battery packs include a fuel gauge which
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories.
An accidental
start-up can cause injury.
WARNING: Use only D
e
WALT battery packs and chargers.
7 Spindle lock button
8
LED worklight
9 Battery pack
10
Battery release button
11 Belt clip
12
Belt clip screw
13 TOOL CONNECT™ Chip pocket (chip sold separately)
14
Dust shroud
Intended Use
Your cordless cut‑out tool has been designed for professional
hole cutting applications in plasterboard.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This cordless cut‑out tool is a professional power tool.
DO nOT
let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
1
On/off button
2
Cutting depth guide
3
Collet
4
Collet nut
5
Collet lock button
6
Collet grip
Date Code Position (Fig. B)
The date code 22 , which also includes the year of manufacture,
is printed into the housing.
Example:
2022 XX XX
Year and Week of Manufacture
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
g
Wear ear protection.
f
Wear eye protection
n
Visible radiation. Do not stare into light.
Package Contents
The package contains:
1 Cut‑out Tool
1 General Purpose Bit
1 Drywall Bit
1 6 mm 1/4") Collet
1 3 mm (1/8") Collet
1 Li‑Ion battery pack (C1, D1, G1, L1, M1, P1, S1, T1, X1, Y1
models)
2 Li‑Ion battery packs (C2, D2, G2, L2, M2, P2, S2, T2, X2, Y2
models)
3 Li‑Ion battery packs (C3, D3, G3, L3, M3, P3, S3, T3, X3, Y3
models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by
D
e
WALT is under license. Other trademarks and
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.